Nanjing Pege Loss in Weight Liquid Feeder, Dosing System Principle In loss-in-weight feeding, the entire feeder, hopper and material are continuously weighed. As the feeder discharges material, the rate of decline in system weight is computed, and feeder speed is adjusted to maintain the desired (set) rate. Applications Material Liquid Additive, DCP, Silane, Maleic Anhydride, Antioxidants Features 1. Cantilever type weighing frame ensure lower gravity(barycenter) center, weaker vibration and anti-interference performance of the whole feeder. 2. Stainless Steel bellow sensor has the feature of only slight deformation after long time use, and high precision with less signal drift, and is durable for bad environment use. 3. 485 Digital transmission of weighing data has the feature of no attenuation and anti- interference during the period of data transmission. 4. Hydraulic Diaphragm Pump, Plunger Pump, Gear Pump are selectable. 5. Equipped with complete isolated SUS304 bellow spring damping type spray gun, has the feature of keeping pressure stable within 24 hours. 6. Explosion proof, heat preservation by water or electricity are selectable Liquid LIW Feeder Picture Injection Nozzle Features 1. Fully isolated, SUS304 bellows welding damping spring spray gun 2. It has the function of maintaining pressure when stop the pump, and the system has function of low-pressure cut-off and high pressure open automatically. 3. Solid cone-shaped spaying shape, uniform, and continuous spray volume, 45°--120° diffusion angle optional, 4. The flow rate can be adjusted on the spray gun to spray mis-like liquid to be fully mixed with the powder. Injection Nozzle Picture
Read MoreNanjing Pege Flexible Wall PU Hopper Loss-in-weight Feeder Shipped to Taiwan Flexwall Loss-in-weight feeder suitable for virtually all flowable ingredients (powders, pellets, flakes, fibers, etc.), mostly for the poweders and flakes which are difficult for single or Twin Screw feeders. Pege newly made Flexiblle PU Hopper Loss in weight Feeder shipped to Taiwan for the customer to feeding the material in an efficient and precise way. Get more information at www.pegedeflashing.com. Pege Flexwall Gravimetric Feeder has the features as follows: ■Suitable for all-purpose bulk material, especially for the powder material with humidity and low flowability. ■The cantilever sling type weighing frame supports the storage hopper, which has the characteristics of vibration reduction and anti-level interference, which can effectively shield the non-weight value interference from the vibrator, and measure the flow of the system more accurately ■All contact with materials is SUS304 with inner mirror surface. ■Gentle feed capability by paddling flexible hopper with external agitation. ■Easy to disassemble and to clean, convenient for maintenance. ■No direct touch between stirring unit and material ensures no damage on the materials. ■The stirring and feeding motors are separated, and the speed can be adjusted separately. ■The electronic control system reserves an Ethernet communication interface for remote control.
Read More