Cryogenic Deflashing Equipment,Automatic Freeze Trim Deflashing Machine,Rubber Cutter Machine

Yoga Elastic Resistence Band Cutting Machine

Vacuum Mandrel Cutting can eliminate the burrs problem and highly improve the production capacity.This is the reason we designed our mandrel cutting machines, a kind of precision machines for cutting gaskets and washers from molded or extruded tubes/pipes/hoses made of rubber/plastic/silicone/polyurethane/foam or similar hard and half-hard materials.   Model PG-YAQ-1S PG-YAQ-2S PG-YAQ-4S Shaft Qty One Shaft Two Shafts 4 Shafts Drive Mode Servo Motor Servo Motor Servo Motor Cutting Efficiency Max 60 cut/min Max 120cut/min Max 240cut/min Speed 0～3000r/min 0～3000r/min 0～3000r/min Precision ≤±0.05mm ≤±0.05mm ≤±0.05mm Cut Diameter Range Φ10mm～Φ150mm  Φ10mm～Φ120mm  Φ10mm～Φ110mm  Cutting Length ≤200mm ≤200mm ≤150mm Wall Thickness ≤20mm ≤20mm ≤20mm Blade Spec (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm Consumption of Air 50L/min 50L/min 50L/min Pressure 0.5MPa～0.8MPa 0.5MPa～0.8MPa 0.5MPa～0.8MPa Vacuum Level ≤-0.035MPa ≤-0.035MPa ≤-0.035MPa Power Supply AC220V±5% 50/60Hz AC220V±5% 50/60Hz AC220V±5% 50/60Hz Gross Power 1KW 2KW 3KW Weight ≈400Kg ≈580Kg ≈800Kg Dimension(L*W*H) 1350mm×980mm×1400mm 1550mm×980mm×1650mm 1650mm×980mm×17650mm  

Tags : Rubber Band Cutting Mahcine Latex Resistence Band Cutting Machine Vacuum Mandrel cutting machine Yoga Band Cutting Machine Yoga Resistence strap Cutting Machine Rubber Gasket Cutting Machine
Read More
Flex Wall Paddle Type Loss in Weight Feeder

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The gravimetric weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder will be a loss-in-weight system.   Parameters/Model PG-FP-48 PG-FP-57 PG-FP-89 Capacity range 10-150kg/h 30-450kg/h 100-1500kg/h Hopper Volume 40L 80L 200L Load Cell Range 50kg 75kg 200kg Net Weight 86kg 140kg 200kg Dimension 700x550x900 770x595x1000 1100x710x1040 Power AC380V 3ph Feeding Motor 0.25kw Stirring Motor 0.15kw AC380V 3ph Feeding Motor 0.37kw Stirring Motor 0.2kw AC380V 3ph Feeding Motor 0.55kw Stirring Motor 0.4kw Output method Spring Screw or Solid Single Screw Spring Screw or Solid Single Screw Spring Screw or Solid Single Screw Dynamic accuracy ±0.5% ±0.5% ±0.5% Resolution 1/100000 1/100000 1/100000 Discharge tube Φ48x3 Φ63x3 Φ89x3

Tags : loss in weight batch feeder Flexible Hopper feeder for power Weighing Feeding System Gravimetric Feeder Loss-in-weight Feeder Flexible Wall Feeder
Read More
Single Screw Loss in Weight Feeder

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder may be a loss-in-weight system or a gain-in-weight system.   Parameters/Model PG-FW-48 PG-FW-63 PG-FW-89 PG-FW-114 Capacity range 10-100kg/h 50-500kg/h 100-1000kg/h 200-2000kg/h Hopper Volume 40L 80L 150L 350L Load Cell Range 50kg 120kg 300kg 500kg Net Weight 86kg 140kg 170kg 190kg Size 765x490x770 850x575x915 1055x750x1480 1100x800x1500 Power Servo Motor Drive AC380V 3ph Feeding Motor 0.4kw AC380V 3ph Feeding Motor 0.55kw AC380V 3ph Feeding Motor 0.75kw AC380V 3ph Feeding Motor 1.1kw Screw Type spiral screw or solid single screw spiral screw or solid single screw spiral screw or solid single screw spiral screw or solid single screw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight sensitivity 1g 1g 2g 2g Discharge tube Φ48x3 Φ63x3 Φ89x3 Φ114x3                  

Tags : Dosing feeder for extruder Loss in weight for dosing single screw feeder loss in weight batch feeder Loss in weight weigh feeder Gravimetric Feeder
Read More
Single Screw Gravimetric Feeder

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder may be a loss-in-weight system or a gain-in-weight system.   Parameters/Model PG-FW-48 PG-FW-63 PG-FW-89 PG-FW-114 Capacity range 10-100kg/h 50-500kg/h 100-1000kg/h 200-2000kg/h Hopper Volume 40L 80L 150L 350L Load Cell Range 50kg 120kg 300kg 500kg Net Weight 86kg 140kg 170kg 190kg Size 765x490x770 850x575x915 1055x750x1480 1100x800x1500 Power Servo Motor Drive AC380V 3ph Feeding Motor 0.4kw AC380V 3ph Feeding Motor 0.55kw AC380V 3ph Feeding Motor 0.75kw AC380V 3ph Feeding Motor 1.1kw Screw Type spiral screw or solid single screw spiral screw or solid single screw spiral screw or solid single screw spiral screw or solid single screw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight sensitivity 1g 1g 2g 2g Discharge tube Φ48x3 Φ63x3 Φ89x3 Φ114x3                  

Tags : loss in weight batch feeder Loss in weight weigh feeder Loss-in-weight Feeding Machine Gravimetric Feeder Loss in weight for dosing single screw feeder
Read More
Cryogenic Deburring Machine for Plastic Components

Cryogenic deflashing and deburring is a process that employs cryogenic temperatures to remove flash on manufactured workpieces made of a wide range of rubber and plastic (and other materials) both thermoset and thermoplastic. Some examples of materials used include nylon, Tefzel®, HD-PE, PPS, PET, polycarbonate, polypropylene, polyurethane, liquid crystal polymer, ABS, Peek and Acetal. Manufactured parts that have been successfully deburred include those made through injection molding, compression molding and extrusion molding.

Tags : cryogenic shotblast machine cryogenic deflashing of plastic parts cryogenic deburring for plasitcs cryogenic deflashing for peek parts Cryogenic De-burring Machine Cryogenic De-flashing Machine
Read More
Vacuum Mandrel Gasket Cutting Machine-Multiple Shafts

Vacuum Mandrel Cutting can eliminate the burrs problem and highly improve the production capacity.This is the reason we designed our mandrel cutting machines, a kind of precision machines for cutting gaskets and washers from molded or extruded tubes/pipes/hoses made of rubber/plastic/silicone/polyurethane/foam or similar hard and half-hard materials.     Model PG-YAQ-1S PG-YAQ-2S PG-YAQ-4S Shaft Qty One Shaft Two Shafts 4 Shafts Drive Mode Servo Motor Servo Motor Servo Motor Cutting Efficiency Max 60 cut/min Max 120cut/min Max 240cut/min Speed 0～3000r/min 0～3000r/min 0～3000r/min Precision ≤±0.05mm ≤±0.05mm ≤±0.05mm Cut Diameter Range Φ10mm～Φ150mm  Φ10mm～Φ120mm  Φ10mm～Φ110mm  Cutting Length ≤200mm ≤200mm ≤150mm Wall Thickness ≤20mm ≤20mm ≤20mm Blade Spec (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm Consumption of Air 50L/min 50L/min 50L/min Pressure 0.5MPa～0.8MPa 0.5MPa～0.8MPa 0.5MPa～0.8MPa Vacuum Level ≤-0.035MPa ≤-0.035MPa ≤-0.035MPa Power Supply AC220V±5% 50/60Hz AC220V±5% 50/60Hz AC220V±5% 50/60Hz Gross Power 1KW 2KW 3KW Weight ≈400Kg ≈580Kg ≈800Kg Dimension(L*W*H) 1350mm×980mm×1400mm 1550mm×980mm×1650mm 1650mm×980mm×17650mm  

Tags : Mandrel gasket cutting machine Mandrel washer cutting machine Washer cutter Gasket cutter Rubber Gasket Cutting Machine
Read More
Vacuum Rubber Washer Cutting Machine PG-YAQ-4S

Vacuum Mandrel Cutting can eliminate the burrs problem and highly improve the production capacity.This is the reason we designed our mandrel cutting machines, a kind of precision machines for cutting gaskets and washers from molded or extruded tubes/pipes/hoses made of rubber/plastic/silicone/polyurethane/foam or similar hard and half-hard materials. Model PG-YAQ-1S PG-YAQ-2S PG-YAQ-4S Shaft Qty One Shaft Two Shafts 4 Shafts Drive Mode Servo Motor Servo Motor Servo Motor Cutting Efficiency Max 60 cut/min Max 120cut/min Max 240cut/min Speed 0～3000r/min 0～3000r/min 0～3000r/min Precision ≤±0.05mm ≤±0.05mm ≤±0.05mm Cut Diameter Range Φ10mm～Φ150mm  Φ10mm～Φ120mm  Φ10mm～Φ110mm  Cutting Length ≤200mm ≤200mm ≤150mm Wall Thickness ≤20mm ≤20mm ≤20mm Blade Spec (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm Consumption of Air 50L/min 50L/min 50L/min Pressure 0.5MPa～0.8MPa 0.5MPa～0.8MPa 0.5MPa～0.8MPa Vacuum Level ≤-0.035MPa ≤-0.035MPa ≤-0.035MPa Power Supply AC220V±5% 50/60Hz AC220V±5% 50/60Hz AC220V±5% 50/60Hz Gross Power 1KW 2KW 3KW Weight ≈400Kg ≈580Kg ≈800Kg Dimension(L*W*H) 1350mm×980mm×1400mm 1550mm×980mm×1650mm 1650mm×980mm×17650mm  

Tags : Rubber Band Cutting Mahcine Mandrel gasket cutting machine Vacuum Mandrel cutting machine Washer cutter Rubber Gasket cutter Rubber Gasket Cutting Machine
Read More
Twin Screw Loss in Weight Feeder System

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder may be a loss-in-weight system or a gain-in-weight system. Parameters Model PG-FT-30 PG-FT-39 PG-FT-46 PG-FT-56 Capacity range 15-150kg/h 50-300kg/h 100-800kg/h 200-1500kg/h Hopper Volume 50L 80L 150L 250L Sensor Range 80kg 200kg 250kg 300kg Net Weight 80kg 140kg 170kg 190kg Size 975x470x965 1065x540x1150 1135x610x1300 1160x650x1400 Power AC380V Feeding motor 0.37kw +stirring motor 0.2kw AC380V 3ph Feeding 0.55kw +Stirring 0.4kw AC380V 3ph Feeding 0.75kw +stirring 0.4kw AC380V 3ph Feeding 1.1 kw +Stirring 0.4kw Servo Motor Optional 220V 1 Ph 0.4KW*2 220V 1 Ph 0.75KW*2 220V 1 Ph 1KW*2 220V 1 Ph 2KW*2 Screw Solid Twin Screw Solid Twin Screw Solid Twin Screw Solid Twin Screw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Resolution 1/100000 1/100000 1/100000 1/100000 Discharge tube Φ45x3x2 Φ57x3x2 Φ65x3x2 Φ89x3x2

Tags : Automatic Loss in Weight Feeder Screw Gravimetric Feeder Loss in weight feeder system loss in weight batch feeder Gravimetric Feeder Loss-in-weight Feeder
Read More
Twin Screw Loss in Weight Extruder Feeder

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder may be a loss-in-weight system or a gain-in-weight system. Parameters Model PG-FT-30 PG-FT-39 PG-FT-46 PG-FT-56 Capacity range 15-150kg/h 50-300kg/h 100-800kg/h 200-1500kg/h Hopper Volume 50L 80L 150L 250L Sensor Range 80kg 200kg 250kg 300kg Net Weight 80kg 140kg 170kg 190kg Size 975x470x965 1065x540x1150 1135x610x1300 1160x650x1400 Power AC380V Feeding motor 0.37kw +stirring motor 0.2kw AC380V 3ph Feeding 0.55kw +Stirring 0.4kw AC380V 3ph Feeding 0.75kw +stirring 0.4kw AC380V 3ph Feeding 1.1 kw +Stirring 0.4kw Servo Motor Optional 220V 1 Ph 0.4KW*2 220V 1 Ph 0.75KW*2 220V 1 Ph 1KW*2 220V 1 Ph 2KW*2 Screw Solid Twin Screw Solid Twin Screw Solid Twin Screw Solid Twin Screw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Resolution 1/100000 1/100000 1/100000 1/100000 Discharge tube Φ45x3x2 Φ57x3x2 Φ65x3x2 Φ89x3x2

Tags : Extruder feeder Gravimetric batch feeder loss in weight batch feeder Loss-in-weight dosing feeder Gravimetric Feeder Loss-in-weight Feeder
Read More
Twin Screw Gravimetric Feeder

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder may be a loss-in-weight system or a gain-in-weight system. Parameters Model PG-FT-30 PG-FT-39 PG-FT-46 PG-FT-56 Capacity range 15-150kg/h 50-300kg/h 100-800kg/h 200-1500kg/h Hopper Volume 50L 80L 150L 250L Sensor Range 80kg 200kg 250kg 300kg Net Weight 80kg 140kg 170kg 190kg Size 975x470x965 1065x540x1150 1135x610x1300 1160x650x1400 Power AC380V Feeding motor 0.37kw +stirring motor 0.2kw AC380V 3ph Feeding 0.55kw +Stirring 0.4kw AC380V 3ph Feeding 0.75kw +stirring 0.4kw AC380V 3ph Feeding 1.1 kw +Stirring 0.4kw Servo Motor Optional 220V 1 Ph 0.4KW*2 220V 1 Ph 0.75KW*2 220V 1 Ph 1KW*2 220V 1 Ph 2KW*2 Screw Solid Twin Screw Solid Twin Screw Solid Twin Screw Solid Twin Screw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Resolution 1/100000 1/100000 1/100000 1/100000 Discharge tube Φ45x3x2 Φ57x3x2 Φ65x3x2 Φ89x3x2

Tags : Gravimetric Feeder Loss-in-weight Feeder Gravimetric batch feeder loss in weight batch feeder Loss-in-weight Feeding Machine
Read More
Vacuum Mandrel Cutting Machine PG-YAQ-2S

Vacuum Mandrel Cutting can eliminate the burrs problem and highly improve the production capacity.This is the reason we designed our mandrel cutting machines, a kind of precision machines for cutting gaskets and washers from molded or extruded tubes/pipes/hoses made of rubber/plastic/silicone/polyurethane/foam or similar hard and half-hard materials.     Model PG-YAQ-1S PG-YAQ-2S PG-YAQ-4S Shaft Qty One Shaft Two Shafts 4 Shafts Drive Mode Servo Motor Servo Motor Servo Motor Cutting Efficiency Max 60 cut/min Max 120cut/min Max 240cut/min Speed 0～3000r/min 0～3000r/min 0～3000r/min Precision ≤±0.05mm ≤±0.05mm ≤±0.05mm Cut Diameter Range Φ10mm～Φ150mm  Φ10mm～Φ120mm  Φ10mm～Φ110mm  Cutting Length ≤200mm ≤200mm ≤150mm Wall Thickness ≤20mm ≤20mm ≤20mm Blade Spec (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm (1)Round Blade：Φ60×Φ25.4×Φ0.35mm Consumption of Air 50L/min 50L/min 50L/min Pressure 0.5MPa～0.8MPa 0.5MPa～0.8MPa 0.5MPa～0.8MPa Vacuum Level ≤-0.035MPa ≤-0.035MPa ≤-0.035MPa Power Supply AC220V±5% 50/60Hz AC220V±5% 50/60Hz AC220V±5% 50/60Hz Gross Power 1KW 2KW 3KW Weight ≈400Kg ≈580Kg ≈800Kg Dimension(L*W*H) 1350mm×980mm×1400mm 1550mm×980mm×1650mm 1650mm×980mm×17650mm  

Tags : Mandrel gasket cutting machine Mandrel washer cutting machine Washer cutter Gasket cutter Rubber Gasket Cutting Machine
Read More
Loss in Weight Liquid Feeder

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The gravimetric weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder will be a loss-in-weight system. Parameters/Model PG-FL-05（H) PG-FL-20（H) PG-FL-40（H) PG-FL-80（H) Capacity range 1-5kg/h 4-20kg/h 15-80kg/h 24-120kg/h Hopper Volume 5L 10L 20L 40L Sensor Range 5kg 10kg 20kg 50kg Net Weight 150kg 180kg 200kg 220kg Size (L*W*H) 1125x650x1370 1125x700x1470 1125x750x1570 1125x800x1670 Power AC380V 3ph 0.25kw AC380V 3ph 0.37kw AC380V 3ph 0.55kw AC380V 3ph 0.75kw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight Sensitivity 0.1g 0.1g 0.5g 0.5g   (H) here means Heating function, it is optional.

Tags : Loss in weight feeder system gravimetric liquid feeder liquid feeder Gravimetric Feeder Liquid Loss-in-weight feeder Loss-in-weight Feeder
Read More

Products