Banner
Spin Trim Deflashing Machine with Vibratory Separator PG-ST-377
Home | Spin Trim De-flashing Machine |

Spin Trim Deflashing Machine with Vibratory Separator PG-ST-377

Spin Trim Deflashing Machine with Vibratory Separator PG-ST-377

Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts. 

 

Spin Trim De-flashing Machine Specification

Model

PG-ST-377

Power Supply

5.5KW 380V 3ph 50/60Hz

Size

1890*660*1400mm

Basket Diameter

Ø 377mm

Weight

290kg

Gas supply

0.4mpa-0.6mpa

Wheel Speed

0-6000rpm

Process efficiency

about 2kg per min

Batch Time

30-50seconds/ batch

Flashes Separation

Vibrator Separating

Operation Mode

Touch Screen

 

 

 

Spin Trim Deflashing Machine with Vibratory Separator

 

Spin Trimming Machine Description

Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts. Including O ring, rubber plug, Y rings, Gaskets, or solid irregular parts with size of 2mm-150mm can be de-flashed efficiently.

Our spin trim automatic rubber de-flashing machine’s high quality& efficiency can perfectly replace some of traditional manual deflashing works.

Spin trim de-flashing does not need Liquid nitrogen or blasting media, it is very cost saving and cost effective.

 

 

Descriptions of Vibrating Separator

1.      Using 2 screen plates to separate the flashes after spinning, first layer separates the big flashes, second layer to keep de-flashed parts while the third layer to remove small flash.

2.      Easy operation to change the different size screen plate

3.      Suitable for separating different size of flashes and will be more efficient to work with spin trim de-flashing machine together to ensure quick, convenient, and automatic de-flashing process for rubber parts.

 

Parts Suitable for Spin Trim Deflashing

 

Some Shippings to European Countries

 

Spin trimming deflashing machine from Nanjing Pege are qualified and reliable, the performance is excellent, many sets of spin trim deflashing machine had been shipped to Europe for the deflashing process at customer's factory.

Italy

Slovenia

Germany

Factory Workshop and Spin Trim Rubber Deflashing Machines

 

 

Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • Spin trim deflashing machine
    Spin Trimming Deflashing Machine PG-ST-377 with Air Blowing Separator PG-AB-377

    Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

  • Spinning Deflashing Machine with Vibratory Separator PG-ST-377

    Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

  • Air Blow Separator for Spinning Trim Machine PG-AB-377

    Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

  • Spin Trim Deflashing Machine with Vibratory Separator PG-ST-377

    Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

  • Spinning Trim Deflashing Machine PG-ST-377 with Air Blowing Separator PG-AB-377

    Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

  • Air Blow Separator for Spin Trimming Machine PG-AB-377

    Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsApp