Banner
Air Blow Separator for Spinning Trim Machine PG-AB-377
Home | Spin Trim De-flashing Machine |

Air Blow Separator for Spinning Trim Machine PG-AB-377

Air Blow Separator for Spinning Trim Machine PG-AB-377

Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.

 

Air Blowing Separator

Model

PG-AB-377

Dimension

L2060mm*W700mm*H2000mm

Power Supply

3KW 380V 50-60HZ. 3PH

Machine Frame Tube

40*40mm (Square Tube with Stoving Varnish)

Sealing Plate

1.5mm Thickness (Stoving Varnish)

Vibrating Hopper Dimension

L540*W400*H200mm (Stoving Varnish)

Damping Spring

Out Ø40mm   Wire Ø 4mm    L 120mm

Damping Spring Holder

Rubber Dumper Pre-Installed Screw

Vibrator Motor

0.12KW

High Speed Blower

1.1KW

Blower Inverter

1.5KW     

Vibrating Hopper Inverter

0.25KW  

Air Running Tube

300mm*200mm

Adjustable Fuma Wheels

4PCSLOW NOISE

Air Blowing Separator for Spin Trim Deflashing Machine

 

Introduction

After Spin Trim Deflashing, the flashes and deflashed parts are mixed together, many are irregular shape and size, normal vibrator may not be qualified to separate the flashes effectively.

Air Blow Separator is an innovative equipment which is developed for supporting for flashes separation process after spin trim deflashing machine. Air blow separator successfully solves the problem of flashes mixing together during the spin trim deflashing process.

Lifter between spin trim deflashing machine and the Air blowing separator is an optional equipment for automatic transferring of the deflashed parts containing flashes to the separator.

Features:

1.      Air energy separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed

2.      Various part and flashes are available, efficient and cost effective.

3.      A lifter is an optional for the user to connect from spin trim deflashing machine to the separator. Automatic operation is a method  to save time, labor and be more automatic. The products and flashes or burrs are lifted and transported directly to the air blowing separator to realize a on-line deflashing and burr separation process.

 

Before and After Spin Trim and Air Blow Separation

After

After

After

 

Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • Spin trim deflashing machine
    Spin Trimming Deflashing Machine PG-ST-377 with Air Blowing Separator PG-AB-377

    Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

  • Spinning Deflashing Machine with Vibratory Separator PG-ST-377

    Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

  • Air Blow Separator for Spinning Trim Machine PG-AB-377

    Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

  • Spin Trim Deflashing Machine with Vibratory Separator PG-ST-377

    Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

  • Spinning Trim Deflashing Machine PG-ST-377 with Air Blowing Separator PG-AB-377

    Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

  • Air Blow Separator for Spin Trimming Machine PG-AB-377

    Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS(LOW NOISE)

leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsApp