The Main Compositions of A Cryogenic Deflashing System A cryogenic deflashing machine, also known as a cryogenic deflashing system, is used for removing unwanted burrs, flash, or excess material from molded or machined components. The composition of a cryogenic deflashing system generally includes the following components: 1. Deflashing Chamber: This is the main working chamber where the components to be deflashed are placed. It is usually a sealed, insulated enclosure designed to withstand low temperatures. 2. Liquid Nitrogen (LN2) Supply: Cryogenic deflashing relies on liquid nitrogen as the cryogenic medium. The LN2 supply provides the necessary cooling agent required for the process. 3. LN2 Delivery System: This system is responsible for delivering liquid nitrogen to the deflashing chamber. It typically consists of supply lines, valves, and control mechanisms to regulate the flow of LN2. 4. Control Panel: The control panel houses the electrical and electronic components that control and monitor the cryogenic deflashing process. It includes temperature controllers, timers, pressure gauges, and safety features. 5. Media Circulation Mechanism: Some cryogenic deflashing machines incorporate an auto media circulation system to realize the media blasting function and then enhance the deflashing process. This can be in the form of tumbling barrels, rotating baskets, or oscillating fixtures. 6. Exhaust System: As cryogenic  deflashing process generates gases and vapors, an exhaust system is employed to remove these by-products from the deflashing chamber. It helps maintain a safe working environment and prevents the accumulation of hazardous substances. 7. Filtration System: To remove any debris or particulate matter generated during the deflashing process, a filtration system may be included. It helps ensure the cleanliness of the liquid nitrogen and prolong the equipment's lifespan. 8. Safety Features: Cryogenic deburring machines often have safety features such as emergency stop buttons, alarms, and interlocks to ensure operator safety during operation.   It's important to note that specific configurations and features of cryogenic deflashing systems may vary depending on the manufacturer and the intended application.

An aluminum foil airline food container making machine is a specialized machine used for the production of aluminum foil food containers specifically designed for use in airlines and other similar food service industries. The aluminum foil plate/ tray making machine is capable of producing a high volume of uniform and standardized food containers in a fast and efficient manner. The main components of an aluminum foil airline food container making machine typically include: Feeding System: This system is responsible for feeding the aluminum foil material into the machine for further processing. It may consist of a roll of aluminum foil and a tension control system to ensure smooth and continuous feeding. Material Cutting System: The machine is equipped with a cutting system to accurately cut the aluminum foil into the desired shape and size for the food containers. Various cutting mechanisms such as rotary cutting or stamping may be used depending on the specific design of the machine. Molding System: This system shapes and molds the cut aluminum foil into the final form of the food container. It may utilize a combination of mechanical presses and molds to create the necessary folds and shapes required for the container. Punching System: A punching system is employed to create perforations or ventilation holes in the formed aluminum foil containers, allowing steam and heat to circulate during the food heating process. Stacking and Collection System: The machine typically includes a stacking and collection system to neatly stack and collect the finished aluminum foil containers, ready for packaging and transportation. Control System: The aluminum foil plate/ tray making machine is controlled by an automated control system that enables operators to set parameters such as container size, cutting length, perforation patterns, and production speed. It ensures proper synchronization and coordination of the various machine components for efficient operation. The main features of an aluminum foil airline food container making machine include high production efficiency, precise cutting and shaping capabilities, adjustable container sizes, automatic operation with minimal manual intervention, and reliable performance. These machines are designed to meet the specific requirements of the airline food service industry, producing containers that are lightweight, durable, and suitable for sealing and reheating food during flight operations.

Nanjing Pege’s “PEIKE” brand Gravimetric Loss-in-weight feeder   Introduction Nanjing Pege Techno Machine Co., Ltd is specialized in designing and producing the low in weight feeders including single and twin screws loss in weight feeder, liquid gravimetric feeder, micro scale feeder, vibratory feeder, Paddle massaged flexible PUR hopper feeder and multi-ingredients compounding feeder. Our products are successfully applied in various dosing and blending(mixing) field, like chemistry, engineering plastics, cable, food processing, pharmaceutical and building material industries. Our head company is constantly dedicated to providing the solutions of weighing, feeding, transmission, packing and automatic stacking, to provide the professional products and service for the customer worldwide both in solid and liquid product manufacturing field. To strengthen our competence and leading position in the gravimetric weighing field, we integrated our profound technology and talents to better improve our design and manufacturing competence.   PRODUCTS Twin screw loss-in-weight feeder  Application material Resin Granules, Resin Powder, Calcium carbonate, French Chalk, Tio2, Carbon Black   Features 1. Cantilever type weighing frame ensure lower gravity(barycenter) center, weaker vibration and anti-interference performance of the whole feeder. 2. Vertical U-shaped hopper with mirror-like inner wall and without corner enclosure can ensure no bridge of the materials 3. Stainless Steel bellow sensor has the feature of only slight deformation after long time use, and high precision with less signal drift, and is durable for bad environment use 4. 485 Digital transmission of weighing data has the feature of no attenuation and anti-interference during the period of data transmission. 5. Feeding and stirring is operated separately, using independent agitation motor and stirring speed can be adjusted according to the demand. 6. No agitation motor on the top of the hopper will surely reduce the vibration during the operation, then this design will achieve high stability and high accuracy. Vibrating Tray Loss-in-weight Feeder   Application material Flack, Glass Fiber, Cylindrical Material, Irregular Shape Material from Recovery   Features 1. Cantilever type weighing frame ensure lower gravity(barycenter) center, weaker vibration and anti-interference performance of the whole feeder. 2. Double weighing sensors weight platform ensure good balance degree and no unbalanced loading 3. 485 Digital transmission of weighing data has the feature of no attenuation and anti-interference during the period of data transmission 4. Vibration type feeding has no damage on the material itself. 5. Electrical magnetic vibration type feeding ensures tiny machine wear and tear and nearly none of maintenance parts are needed   Applications Material Liquid Additive DCP Silane Maleic Anhydride   Features 1.       Cantilever type weighing frame ensure lower gravity(barycenter) center, weaker vibration and anti-interference performance of the whole feeder. 2.       Stainless Steel bellow sensor has the feature of only slight deformation after long time use, and high precision with less signal drift, and is durable for bad environment use. 3.       485 Digital transmission of weighing data has the feature of no attenuation and anti- interference during the period of data transmission. 4.      Hydraulic Diaphragm Pump, Plunger Pump, Gear Pump are selectable. 5.       Equipped with complete isolated SUS304 bellow spring damping type spray gun, has the feature of keeping pressure stable within 48 hours. 6.      Explosion proof, heat preservation by water or electricity are selectable   Flexible Paddle-Massaged PUR Hopper Feeder   Application material Resin Particles, Resin powder, Calcium Carbonate, Talcum powder, Titanium White Powder Carbon Black, Flame Retardant Antioxidant   Features ■Suitable for all-purpose bulk material, especially for the powder material with humidity and low flowability. ■The cantilever sling-type weighing scale supports the storage hopper, which has the characteristics of vibration reduction and anti-level interference. This design can effectively shield the non-weight value interference from the vibrator and measure the flow of the system more accurately. ■No bridging thanks to straight walled hopper. ■Gentle feed capability by paddling flexible hopper with external agitation. ■Easy to disassemble and to clean, convenient for maintenance. ■No direct touch between stirring unit and material ensures no damage on the materials. ■Improve material flowability, optimize dynamic loadings of the screws, to ensure stable and accurate flow rate. ■Arch breaker inside of the machine can ensure efficient weighing feeding even the humidity rate in the materials reaches to 20%   CONTROL SYSTEM FEATURES   1.  Self-learning: The equipment can automatically identify the bulk density and fluidity of the material during the pre-operation, self-tuning during operation and continuously optimizing the best P (proportion) and I (integral) values to ensure rapid response of the system operation 2. Anti-interference: Automatically identify the intensity and duration of the interference and adopt emergency backup procedures to deal with it urgently to ensure the stability and accuracy of the system. 3.       The software is independently developed. After the product leaves the factory, the original program will be burned on the Micro SD card and given to customers randomly. Hardware adjustment. 4.      The mainstream communication formats in the market can be customized according to customer needs, such as Modbus, PPI, MPI, Profibus, Ethernet and other communication formats, so that customers can access the factory's main control system. 5.       The weighing signal transmitter is a customized product with a resolution of one hundred thousandth. The transmitter is installed on the weighing frame and is about one meter away from the weighing sensor. The signal transmission uses RS485 twisted shielded wire and digital transmission. Eliminate signal attenuation and interference 6.      The controller uses Siemens SMART series PLC, each scale uses a CPU, and each scale (each CPU) is connected in parallel by Ethernet. 7.       The RS485 serial port of the Siemens controller communicates with the weighing transmitter, installs an RS485 serial port to communicate with the inverter or servo controller, and the built-in Ethernet port communicates with the touch screen or host computer through the switch. Digital communication throughout the network, high speed, efficiency and stability 8.      The system can display and record operating parameters and can be installed with industrial control computer systems such as domestic Kingview, Siemens Wincc. At the same time, a scanning gun can be installed for barcode parameter reading, process flow recording, and quality traceability.   FAQs on Peike loss-in-weight feeders 1.     What kinds of materials can be used for loss in weight feeding? Resin granules, flack, flocculus, powder and pellets blendings Resin Particles, Resin Powder, Calcium Carbonate, Glass fibers Talcum Powder, Titanium White Powder Carbon Black, Flame Retardant Antioxidant Flack, Glass Fiber, Cylindrical Material, Irregular Shape Material from Recovery Liquid Additive, DCP Silane, Maleic Anhydride   2.    What kinds of feeders are included in the loss in weight feeder series? Our feeding product range includes micro loss in weight feeder, single screw feeder, twin screw feeder, vibratory tray feeder, Paddle massaged Polyurethane Hoppe feeder and liquid loss in weight feeder.

  PPS PET and PA parts nitrogen deburring machine   Cryogenic deflashing and deburring is a process that employs cryogenic temperatures to remove flash on manufactured workpieces made of a wide range of plastics (and other materials) both thermoset and thermoplastic. Some examples of materials used include nylon, HD-PE, PPS, PET, polycarbonate, polypropylene, polyurethane, liquid crystal polymer, PA+GF, PC+GF, PEEK, and Acetal. Manufactured parts that have been successfully deburred include those made through injection molding, compression molding and extrusion molding.    What is “Flash.” “Flash” is a raised edge attached to the workpiece. It is an unwanted piece of material and requires removal. Many medical devices and other precision components are included in deflashing applications. Deburring accounts for a significant amount of the costs of manufacturing. The cryogenic deflashing process causes the flash or burr to become stiff or brittle and break away leaving a clean edge. There are three types of burrs that can be formed in manufacturing operations and can be classified by the physical manner of formation: Poisson burr, roll-over burr and Tear burr. ■Poisson Burr A Poisson burr results from the tendency of a material to bulge at the side when compressed until permanent deformation of the plastic occurs. ■Roll-over Burr A roll-over burr is a burr that is more of a chip that is bent rather that sheared. The resulting burr is usually comparatively larger. The process even removes recessed burrs in blind and through holes. ■Tear Burr A Tear burr is the result of material tearing from a work piece rather than shearing from it. In the cryogenic deflashing process, parts are loaded into a basket. A cryogem such as liquid nitrogen is used to cool the workpieces. After they are cooled they are tumbled with pellets- often a polycarbonate media ranging in size from 0.006 to 0.080 inches (0.15mm to 2.03 mm.) Sometimes cryogenic deflashing does not rely on a blasting action but rather on the tumbling of the parts to remove flash from the outer edges. The process can even remove recessed burrs in blind and through holes. The process does not affect the surface finish or the geometry of the part. Edges are maintained without rounding or removal of extra material and only the unwanted burrs are removed.   Cryogenic Deflashing Systems Advantages Cryogenic deflashing equipements provides advantages over manual deflashing. ■The process maintains part integrity and critical tolerances. As it is a bath process the price per piece is far less as many more parts can be processed at the same time. ■Cryogenic deflashing is non-abrasive. ■As the process is computer controlled, the human operator variable is removed from the process. ■Mold life is extended by the cryogenic deflashing process. Instead of making a new mold a company may choose to deburr a manufactured part cryogenically and achieve the same product quality very much as they would with a new mold for a period of time until maintenance is performed.   Pege’s Automatic Nitrogen Trimming Machine’s Features ■Greater productivity ■Large output in short time ■Better and consistent Finish ■Low Labour dependence ■Space Saving ■Low Media Consumption ■Wide variety of rubber compounds - NR to Silicon Rubber ■Low Nitrogen Usage ■Simple Electrical Controls ■High Efficiency Blast Wheel ■Safety Interlocks ■Simple and Very Low maintenance      

PU TPU TPE parts cryogenic deburring machine   Cryogenic Deflashing or cryogenic deburring is available for all molded parts, including those made of plastics, polymers, nylons, rubbers, silicone rubber, polyurethane, neoprene, liquid crystal polymer, urethane, viton, polycarbonate, PTFE, PPS, delrin, polypropylene, EPDM, nitrile, butyl, DAP, ABS, PEEK, Acetal and aluminum zinc die cast and precision elastomer parts.   Cryogenic Deflashing Works On Most Molded Parts   The computer-controlled process generates repeatable and reliable results. Many medical devices and other high value precision molded components are included in our vast array of successful deflashing applications. We have processed parts manufactured through injection molding, compression molding and extrusion molding. Our machine offers a fast and repeatable process to remove flash from plastic parts. Through freezing, tumbling and blasting polycarbonate media at your injection molded plastic parts, we are able to remove residual mold flash time and time again. The Cryogenic Deflashing process was originally created to remove mold flash from rubber parts. We are able to deflash rubber parts that are injection molded, extrusion molded and compression molded. We have processed parts made of various durometers. We typically deflash rubber parts made of EPDM, neoprene, Viton, Buna-N, nitrile, natural gum, SBR, butyl, and other elastomers. Our Cryogenic Deflashing machine is often used by molders who work with silicone rubber. Silicone rubber, by its nature, is very viscous causing it to flash during the molding process. The Pege’s Deflashing machine removes mold flash from silicone rubber parts. We deflash parts made of liquid silicone rubber and even special blends of silicone rubber that include conductive fillers such as silver, graphite, nickel. Rather than invest in an expensive new or repaired mold tool, customers can elect to extend the functional life of their mold tool by adding the additional step of deflashing, to finish the part and remove any residual flash leftover after molding operations. It is economical to pay only a slight premium per part than to invest in a new molding tool that has a limited production life.         Cryogenic Deflashing is a fast and efficient process that provides complete removal of mold flash without affecting the surface finish. Therefore, it is a safe,clean and cost-effective alternative to traditional methods. Parts are placed in a chamber, cooled, tumbled and impacted with plastic polycarbonate media. Mold flash is removed quickly and cleanly. No dust or residue remains after deflashing. Cryogenic Deflashing is more cost-effective than labor-intensive hand deflashing by a significant margin. The cost to process parts can range from less than .01 cent to several dollars apiece. General rule of thumb: cost is between 10% and 20% of the value of the part, although each part must be considered on its individual   Nanjing Pege’s Cryogenic Deburring Machine’s ADVANTAGES Greater productivity Large output in short time Better and consistent Finish Low Labour dependence Space Saving Low Media Consumption Wide variety of rubber compounds - NR to Silicon Rubber Low Nitrogen Usage Simple Electrical Controls High Efficiency Blast Wheel Safety Interlocks Simple and Very Low maintenance   Our factory and Workshop of cryogenic deflashing systems Nanjing Pege Techno Machine Co.,Ltd production plant is located in the No.9 Ankang road, Guli Industrial Zone, Jiangning District, Nanjing.We have professional production workers and process, are determine to produce best product for the customer all over the world   Packing and Transportation of cryogeic deflashing equipments The machine produced by Nanjing Pege is well packed by plywood carton suitable for long distance sea transportation to ensure machine safety and performance. We can help customer to arrange the transportation by the terms of FOB, CIF with land or sea transportation methods according to the request from the 

Cryogenic Deflashing Machine Product and Company Introduction   Cryogenic deflashing machines are known for its precise quality de-flashed parts with up to 95% performance output without affecting the final part dimension and shape from small O-rings to big molded parts. These Machines serve the need for Rubber, Metal-Rubber parts, small precision plastic parts and small die-casting parts like Zinc and Magnesium alloy. rubber deflashing machine, Rubber Deflashing machine supplier in China, O ring Deflasing machine supplier in China,Deflashing machine supplier in China, Liquid Nitrogen Cryogenic Deflashing machine supplier in China   Product Description Working Principle of Rubber Deflashing Machine With the decrease of the temperature, rubber/plastic parts enter into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed, and the product not be damaged.   Specifications Mode PG-40T PG-60T PG-80T PG-100T PG-120T PG-150T Capacity 40Liter 60Liter 80Liter 100Liter 120Liter 150Liter Wheel size 250mm 250mm 300mm 300mm 350mm 350mm   Worldwide Installations of Nanjing Pege Cryogenic Deburring Machine USA, Mexico Australia, New Zealand Poland, Croatia, Slovenia, Hungary, Greece Russia Malaysia, Thailand, Vietnam, India   FUNCTIONS of cryogenic trimming machine Our rubber deflashing machine is widely used in removing the flashed of small rubber and plastic parts like O-rings, gaskets and other molded parts. With the cryogenic processing technology, the flashes are firstly freeze and then shot down the high-speed projection media (Polycarbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly. Product Specification / Models   APPLICATIONS of cryogenic deflashing machine A. O rings, irregular rubber parts with different material and sizes. B. Micro electronic product parts C. Precision elastomeric parts D. Precision injection moulding plastic parts E. R & D part runs F. Die casting products, like zinc aluminum, magnesium alloy   FEATURES of cryogenic deburring machine High efficiency: The machine can replace about 60-80 worker to removing the flashes. High precision: It can remove small and hardened flashes which cannot be removed by handworkers and improve precision of the products. Low cost: It also has a feature of lower cost comparing with processing the parts by handworkers.   Nanjing Pege Techno Machine Co.,Ltd production plant is located in the No.9 Ankang road, Guli Industriall Zone, Jiangning District, Nanjing. We have professional production workers and process, are determing to product best product for the customer all over the world The cryogenic deflashing machine produced by Nanjing Pege is well packed by polywood carton suitable for long distance sea transpotation to ensure machine safety and performance. We can help customer to arrange the transportation by the terms of FOB, CIF with land or sea transportation methods according to the resuqest from the customer.

  Most frequently asked question regarding the technology of the cryogenic deflashing    1. What is cryogenic deflashing? Deflashing machines use liquid nitrogen to help the part reach a low enough temperature where its substrate becomes protected. Once the excess flash or burrs reach a brittle state, the cryogenic deflashing machines are used to tumble and blast the part with polycarbonate or other media to remove the unwanted flash.   2. Does cryogenic deflashing work on molded plastic parts? Yes. The process removes burrs and flash on plastics, metals, and rubber.   3. Can cryogenic deflashing remove internal and microscopic burrs? Yes. The cryogenic process combined with the appropriate media in the deburring machine removes the smallest burs and flashing.   4. What are the advantages of cryogenic deflashing? Deflashing is an efficient and highly effective method that provides several advantages, including: ·   ♦ High level of consistency ·   ♦ Non-abrasive and will not damage finishes ·   ♦ Lower cost than other plastic deflashing methods ·   ♦ Maintains part integrity and critical tolerances ·   ♦ Lower price per piece ·   ♦ Use low cost cryogenic deflashing to avoid repairing your expensive mold. ·   ♦ Computer controlled process provides higher accuracy than manual deburring   5. What kind of products are able to be cryogenically deflashed? Broad range of products, including: ·   ♦ O-rings & gaskets ·   ♦ Medical implants, surgical tools and devices ·   ♦ Electronic connectors, switches, and bobbins ·   ♦ Gears, washers and fittings ·   ♦ Grommets and flexible boots ·   ♦ Manifolds and valve blocks   6. How to know if the product is suitable for cryogenic deflashing？ Sample Deflashing TestsWe invite you to send us some of your parts for sample deflashing tests. This will enable you to review the quality of deflashing our equipment can achieve. In order for us to establish parameters for the parts you send, please identify each, by your part number, the main compound used in the manufacturing, along with a finished or Q.C. example. We use this as a guide to your expected quality level      

Consumables for cryogenic trimming machine – supply of liquid nitrogen   The frozen cryogenic deflashing machine, as an essential auxiliary manufacturing machinery in the production process of rubber enterprises, has been indispensable. However, since its entry into the mainland market around the year 2000, local rubber enterprises have little knowledge of the working principles and processes of the frozen trimming machine. Therefore, this article will provide a detailed introduction to the storage and supply methods of the cryogen, liquid nitrogen, for cryogenic deflashing machine. In the past, liquid nitrogen was typically stored in separate liquid nitrogen tanks. Therefore, when purchasing a cryogenic trimming machine, it was necessary to buy a matching liquid nitrogen tank to ensure the proper operation of the machine. The installation of the liquid nitrogen tank required approval from the relevant authorities, which was a cumbersome process, and the tanks themselves were expensive. This has led many factories that urgently need to use cryogenic deflashing machines to improve work efficiency to hesitate, as it also involves a certain upfront cost investment. Nanjing PEGE has introduced a liquid nitrogen manifold supply station to substitute for liquid nitrogen tanks. T his system centralizes the gas supply of individual gas points, enabling multiple low-temperature Dewar flasks to be combined for centralized gas supply. It solves the cumbersome process of handling liquid nitrogen tanks, allowing customers to operate the frozen edge trimming machine immediately after purchase. The main body of the system simultaneously connects three bottles of liquid nitrogen Dewar flasks, and it also includes a port that can be expanded to accommodate four bottles. The system pressure is adjustable and equipped with a safety valve. It’s easy to assemble and can be mounted on the wall using a triangular bracket or placed on the ground using the bracket.

  Applications Areas of Cryogenic Deflashing Machine Applicable Materials Of Cryogenic Deflashing ● RubberThe cryogenic deflashing machine can process products made of neoprene, fluoro rubber, EPDM and other rubber materials. The common ones are seal rings / O-rings, auto parts, rubber parts, rubber insoles, silicone products, etc.   ● Injection molding (including elastomer materials)The cryogenic rubber deflashig machine can process products made of PA, PBT and PPS. The common ones are connectors, nanoforming structural parts, medical use injection parts, automotive injection parts, mobile phone cases, mouse cases, injection molding miscellaneous parts, etc.; also products made of TPU and TPE elastic material, such as watch bands, wristbands, soft sleeves, plastic cases, etc.   ● Zinc magnesium aluminum die-castingThe cryogenic deburring machine can process aluminum, zinc, magnesium alloy products. The common ones are auto parts, metal crafts, decoration items, toy parts and etc.    

The definition, principal, and composition of a typical Cryogenic Deflashing Machine A cryogenic deflashing machine, also known as a cryogenic deburring system, is a type of equipment used to remove excess material or flash from molded or machined parts. Cryogenic deflashing is a process that involves the use of extremely low temperatures to freeze the parts and then removing the flash using various methods. The cryogenic rubber deflashing machine typically consists of a large chamber or tub where the parts are placed. Liquid nitrogen  is used to rapidly cool the parts, making them brittle. Once the parts are sufficiently cooled, they are subjected to tumbling or blasting action, which causes the brittle flash to break off from the parts. The rubber or plastic flash is then separated from the parts using air, vibration, or other means. Cryogenic deflashing is commonly used in industries such as automotive, aerospace, electronics, and medical devices, where precision and cleanliness are critical. It is an effective and efficient method for removing flash from complex-shaped parts without damaging the component itself. Moreover, cryogenic deflashing is considered to be environmentally friendly compared to traditional methods that involve the use of harsh chemicals or mechanical trimming. Nanjing Pege Techno is a leading supplier of various type of cryogenic deflashing machines.

Pege’s Cryogenic Deflashing/Deburring Machine Features ■Visual& Intelligent HMI Panel - User friendly 11inch HMI operation panel, one stop operation mode, can record and read the parameters, easy to operate and manage。 ■Robust Machine Frame - Frame is all made of 304 stainless steel, its edge uses red powder coating process to ensure both durability and elegant appearance. ■Compact Design to Save LN2 Consumption - To optimize the machine design to make sure the machine chamber is compact and small for saving liquid nitrogen to lower running cost. ■Greater Insulation Effect - Despite of using 75mm thicker insulation material, the insulation material is strengthened by SUS304 material, to ensure excellent heat preservation effect, also can lower LN2 consumption largely. ■Higher Blasting Speed with Big Diameter Wheel Ensure Great Power - Different wheel size choices ensure perfect match between power and barrel capacity to realize best processing result and highest productivity. Our 80Liter use a Ф300mm wheel with a max 7000rpm speed, and 120Liter&150liter a 350mm wheel with a max 7000rpm speed. ■Durable and Efficient Vibrator-Reliable customized SUS 304 vibrator can keep stable running for more than 10 years in the low temp, high humidity environment without failure. ■Bigger Diameter Sieve for Better Separation-Bigger capacity model(120liter&150liter’s) vibrator sieve diameters are around 600mm, which is larger than most of other manufactures, has the advantage of quicker filtering flash and media and has higher efficiency. ■Automatic Media Suction and Blasting- Automatic media circulation system by negative pressure occurred in machine inner chamber, not by screw lifter, save media and more intelligent. ■World Well-known Controller brand like SIEMENS, Panasonic or Mitsubishi, Omron to ensure high working stability in the low temp environment.■Easy and Convenient Media Exchange system to make operation quicker and easier. ■Better Gear Box Design and use customized anti-low temp oil seal to ensure very few dusts get into the box, so less maintenance on gear box. ■More Durable Umbrella Gear and Bearings will ensure long term consistent running with less failure and less maintenance cost. ■Robust Barrel and Machine Door-use strong and thick steel for barrel and machine doors, deformation will not happen even after long time use.  

Why cryogenic deflashing machines are becoming more and more popular? The use of cryogenic deflashing machines has revolutionized the way manufacturers produce high-quality products. Cryogenic deflashing machines use liquid nitrogen to remove excess material from manufactured parts. The process is fast and precise, making it ideal for mass production. In this article, we will explore the advantages of cryogenic deflashing machines and why they replace traditional manual deflashing methods. First of all, using a cryogenic deflashing machine is environmentally friendly. This makes Operating Room safer, healthier choice for workers and the environment. Secondly, cryogenic deflashers require less maintenance than traditional deflashing methods. This is because high quality spare part enable the machine to operate for a long time and do not require frequent replacement or maintenance. Thus, these machines save the manufacturer time and business cost. Thirdly, the cryogenic deflashing machines provide higher deflashing precision and accuracy. The process is controlled and consistent, ensuring that each pitch is finished to a high standard. This is useful for products that require smooth edges, such as medical instruments, automotive components, and electronic equipment. Finally, the cryogenic deflashing machines are versatile. They are available in a wider range of materials including rubber, injection molding (including elastomeric materials) and zinc magnesium aluminum die casting. This flexibility means they can be used in a variety of industries, making them a valuable investment for many companies. All in all, the advantages of low temperature deburring machines make them an excellent choice for manufacturers. They are environmentally friendly, require less maintenance, provide greater precision, and are versatile. The cryogenic deflashing machines are becoming more and more popular in the manufacturing industry as technology advances and machine designs improve. They are likely to continue to be popular as manufacturers seek to produce high-quality products efficiently and cost-effectively.