PPS PET and PA parts nitrogen deburring machine   Cryogenic deflashing and deburring is a process that employs cryogenic temperatures to remove flash on manufactured workpieces made of a wide range of plastics (and other materials) both thermoset and thermoplastic. Some examples of materials used include nylon, HD-PE, PPS, PET, polycarbonate, polypropylene, polyurethane, liquid crystal polymer, PA+GF, PC+GF, PEEK, and Acetal. Manufactured parts that have been successfully deburred include those made through injection molding, compression molding and extrusion molding.    What is “Flash.” “Flash” is a raised edge attached to the workpiece. It is an unwanted piece of material and requires removal. Many medical devices and other precision components are included in deflashing applications. Deburring accounts for a significant amount of the costs of manufacturing. The cryogenic deflashing process causes the flash or burr to become stiff or brittle and break away leaving a clean edge. There are three types of burrs that can be formed in manufacturing operations and can be classified by the physical manner of formation: Poisson burr, roll-over burr and Tear burr. ■Poisson Burr A Poisson burr results from the tendency of a material to bulge at the side when compressed until permanent deformation of the plastic occurs. ■Roll-over Burr A roll-over burr is a burr that is more of a chip that is bent rather that sheared. The resulting burr is usually comparatively larger. The process even removes recessed burrs in blind and through holes. ■Tear Burr A Tear burr is the result of material tearing from a work piece rather than shearing from it. In the cryogenic deflashing process, parts are loaded into a basket. A cryogem such as liquid nitrogen is used to cool the workpieces. After they are cooled they are tumbled with pellets- often a polycarbonate media ranging in size from 0.006 to 0.080 inches (0.15mm to 2.03 mm.) Sometimes cryogenic deflashing does not rely on a blasting action but rather on the tumbling of the parts to remove flash from the outer edges. The process can even remove recessed burrs in blind and through holes. The process does not affect the surface finish or the geometry of the part. Edges are maintained without rounding or removal of extra material and only the unwanted burrs are removed.   Cryogenic Deflashing Systems Advantages Cryogenic deflashing equipements provides advantages over manual deflashing. ■The process maintains part integrity and critical tolerances. As it is a bath process the price per piece is far less as many more parts can be processed at the same time. ■Cryogenic deflashing is non-abrasive. ■As the process is computer controlled, the human operator variable is removed from the process. ■Mold life is extended by the cryogenic deflashing process. Instead of making a new mold a company may choose to deburr a manufactured part cryogenically and achieve the same product quality very much as they would with a new mold for a period of time until maintenance is performed.   Pege’s Automatic Nitrogen Trimming Machine’s Features ■Greater productivity ■Large output in short time ■Better and consistent Finish ■Low Labour dependence ■Space Saving ■Low Media Consumption ■Wide variety of rubber compounds - NR to Silicon Rubber ■Low Nitrogen Usage ■Simple Electrical Controls ■High Efficiency Blast Wheel ■Safety Interlocks ■Simple and Very Low maintenance      

PU TPU TPE parts cryogenic deburring machine   Cryogenic Deflashing or cryogenic deburring is available for all molded parts, including those made of plastics, polymers, nylons, rubbers, silicone rubber, polyurethane, neoprene, liquid crystal polymer, urethane, viton, polycarbonate, PTFE, PPS, delrin, polypropylene, EPDM, nitrile, butyl, DAP, ABS, PEEK, Acetal and aluminum zinc die cast and precision elastomer parts.   Cryogenic Deflashing Works On Most Molded Parts   The computer-controlled process generates repeatable and reliable results. Many medical devices and other high value precision molded components are included in our vast array of successful deflashing applications. We have processed parts manufactured through injection molding, compression molding and extrusion molding. Our machine offers a fast and repeatable process to remove flash from plastic parts. Through freezing, tumbling and blasting polycarbonate media at your injection molded plastic parts, we are able to remove residual mold flash time and time again. The Cryogenic Deflashing process was originally created to remove mold flash from rubber parts. We are able to deflash rubber parts that are injection molded, extrusion molded and compression molded. We have processed parts made of various durometers. We typically deflash rubber parts made of EPDM, neoprene, Viton, Buna-N, nitrile, natural gum, SBR, butyl, and other elastomers. Our Cryogenic Deflashing machine is often used by molders who work with silicone rubber. Silicone rubber, by its nature, is very viscous causing it to flash during the molding process. The Pege’s Deflashing machine removes mold flash from silicone rubber parts. We deflash parts made of liquid silicone rubber and even special blends of silicone rubber that include conductive fillers such as silver, graphite, nickel. Rather than invest in an expensive new or repaired mold tool, customers can elect to extend the functional life of their mold tool by adding the additional step of deflashing, to finish the part and remove any residual flash leftover after molding operations. It is economical to pay only a slight premium per part than to invest in a new molding tool that has a limited production life.         Cryogenic Deflashing is a fast and efficient process that provides complete removal of mold flash without affecting the surface finish. Therefore, it is a safe,clean and cost-effective alternative to traditional methods. Parts are placed in a chamber, cooled, tumbled and impacted with plastic polycarbonate media. Mold flash is removed quickly and cleanly. No dust or residue remains after deflashing. Cryogenic Deflashing is more cost-effective than labor-intensive hand deflashing by a significant margin. The cost to process parts can range from less than .01 cent to several dollars apiece. General rule of thumb: cost is between 10% and 20% of the value of the part, although each part must be considered on its individual   Nanjing Pege’s Cryogenic Deburring Machine’s ADVANTAGES Greater productivity Large output in short time Better and consistent Finish Low Labour dependence Space Saving Low Media Consumption Wide variety of rubber compounds - NR to Silicon Rubber Low Nitrogen Usage Simple Electrical Controls High Efficiency Blast Wheel Safety Interlocks Simple and Very Low maintenance   Our factory and Workshop of cryogenic deflashing systems Nanjing Pege Techno Machine Co.,Ltd production plant is located in the No.9 Ankang road, Guli Industrial Zone, Jiangning District, Nanjing.We have professional production workers and process, are determine to produce best product for the customer all over the world   Packing and Transportation of cryogeic deflashing equipments The machine produced by Nanjing Pege is well packed by plywood carton suitable for long distance sea transportation to ensure machine safety and performance. We can help customer to arrange the transportation by the terms of FOB, CIF with land or sea transportation methods according to the request from the 

Why cryogenic deflashing machines are becoming more and more popular? The use of cryogenic deflashing machines has revolutionized the way manufacturers produce high-quality products. Cryogenic deflashing machines use liquid nitrogen to remove excess material from manufactured parts. The process is fast and precise, making it ideal for mass production. In this article, we will explore the advantages of cryogenic deflashing machines and why they replace traditional manual deflashing methods. First of all, using a cryogenic deflashing machine is environmentally friendly. This makes Operating Room safer, healthier choice for workers and the environment. Secondly, cryogenic deflashers require less maintenance than traditional deflashing methods. This is because high quality spare part enable the machine to operate for a long time and do not require frequent replacement or maintenance. Thus, these machines save the manufacturer time and business cost. Thirdly, the cryogenic deflashing machines provide higher deflashing precision and accuracy. The process is controlled and consistent, ensuring that each pitch is finished to a high standard. This is useful for products that require smooth edges, such as medical instruments, automotive components, and electronic equipment. Finally, the cryogenic deflashing machines are versatile. They are available in a wider range of materials including rubber, injection molding (including elastomeric materials) and zinc magnesium aluminum die casting. This flexibility means they can be used in a variety of industries, making them a valuable investment for many companies. All in all, the advantages of low temperature deburring machines make them an excellent choice for manufacturers. They are environmentally friendly, require less maintenance, provide greater precision, and are versatile. The cryogenic deflashing machines are becoming more and more popular in the manufacturing industry as technology advances and machine designs improve. They are likely to continue to be popular as manufacturers seek to produce high-quality products efficiently and cost-effectively.  

Cryogenic Deburring or Deflashing Machine Suitable for Deburring Process of Various Components   Cryogenic deburring deflashing machine is specially applied into the various industries including Rubber like rubber rings, sealings, gaskets, bumpers, silicone parts deflashing, engineering thermoplastic like PA+GF PC+GF PPS POM PET PTFE PEEK deburring,thermoelastomer like TPU TPE TPR TPV TPE parts trimming and diecasting part like Zinc alloy and Mag alloy parts flash cleaning. We can get a prefect result after cryogenic deburring, take a look at the following photos. Nanjing Pege will be happy to provide best cryogenic shotblasting machine for your components precision process. 

Pege Cryogenic Deflashing Machine for PEEK Implants Deburring Process As a precision plastic parts deburring solution,cryogenic deflashing machine from Nanjing Pege plays an important role in trimming plastic parts including PEEK or PE material medical inplant device or components. Have a check on the perfect deflashing examples of CNC maching PEEK inplant components.