Advanced Rubber Strip Cutter Shipped to EU country-Romania for Precsion Cutting   Rubber Strip Cutting Machine used for precise cutting for raw rubber material is an useful and efficient tool for rubber parts manufacutures.  Nanjing Pege strives to provide reliable and quality rubber sheet cutting machine for various rubber industry customers all over the world. At the begining of the new year of rabbit, a set of advance rubber cutting machine for strips had been shipped to our valued customer located in Europe, Romania. This automatic rubber cutting machine can cut up to  1000 width and 20mm thick rubber sheet.  We believe our machine will support greatly on the process of pre-production. Main Features of Advanced Mode 1.     Numerical Rubber Cutting Machine use well-known brand PLC running at high precision and quick response. 2.     The Rubber Cutting Machine has two model, can cut the strip by length or by weight control. 3.     Feeding system use brand servo motor with high accuracy, high stability, and long-life features. Feeding precision can be+-0.1mm and if the cut length is less than 20mm, the weighing precision can be+-0.02g 4.     Main power uses 3phase slowdown brake motor, it is powerful and very safe. 5.     Use imported fiber sense position components, it is accurate and durable. 6.     Driven by chain belt system, can cut FKM sheet of hardness 90℃ easily. 7.     7inch HMI touch screen has the function of automatic counting, monitoring, and warning notice, it is convenient and more direct viewing 8.     Cutting speed is controlled by brand inverter, the cutting speed can be adjusted directly and then it leads to high efficiency. 9.     Strip outlet mouth apply safety door device, two steps protection method to ensure operation safety 10.  Automatic material press system allows lower burden on operator and more convenient operation 11.  Cutting blade use Tungsten steel W18 to ensure durability and long cutting life of blade 12.  Cutting blade apply bevel cut design, it can reduce the cutting resistance and improve cutting speed, upper blade and lower blade cooperate precisely to ensure less abrasion on the cutting blades 13.  Oil lubricant system use automatic electromagnetic pump to reduce break and can filling the oil automatically 14.  Innovated and advance design and manufacturing of the CNC rubber cutting machine is very easy to operate, by using touch screen, any length or cutting speed can be adjusted during the operation.    

Newly Developed Small Size Cryogenic Deflasher PG-30/40T for Small Volume Requst Cryogenic deflashing machines are known for its precise quality de-flashed parts with up to 95% performance output without affecting the final part dimension and shape from small O-rings to big molded parts. These Machines serve the need for Rubber, Metal-Rubber parts, small precision plastic parts and small die-casting parts like Zinc and Magnesium alloy. Single person operation Expertly deflashes parts using cryogenic freezing Separates the sprue and/or waste material from the finished parts Exceptionally fast and automated and safe, improving operational efficiency Provides a pristine quality finish Features of New Samll Model PG-40T Cryogenic Deflasher A.  Compact Deign to Save Location Space. B. Very Suitable for Smaller Rubber Parts Good Deflashing. C.   Lower LN2 Consumption Due to Smaller Machine Cabinet. D.   Powerful Blasting Force by Applying A 3.7KW Blasting Motor with A 250mm Diameter Wheel. E.   Efficient Separation System Suitable for Various Flash Condition. F.    Higher Processing Efficiency Comparing with Same Size from Other Brands.  G.    Famous Brands Components for Electrical and Driving System H.   Affordable Lower Cost. Working principle of rubber nitrogen deflashing machine   With the decrease of the temperature, rubber/plastic parts enter into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed, and the product is not damaged. Functions of rubber cryogenic deflashing machine  Our rubber cryogenic deflashing machine is widely used in removing the flashed of small rubber and plastic parts like O-rings, gaskets and other molded parts. With the cryogenic processing technology, the flashes are firstly freeze and then shot down the high-speed projection media (Polycarbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly. Applications of rubber cryogenic deflashing machine  A. O rings, irregular rubber parts with different material and sizes. B. Micro electronic product parts C. Precision elastomeric parts D. Precision injection moulding plastic parts E. R & D part runs F. Die casting products, like zinc aluminum, magnesium alloy Company profile NANJING PEGE TECHNO MACHINE CO., LTD is a leading quality and customer-oriented manufacturer and supplier who is specialized in providing rubber and plastic industry machines. Rubber sector machines focus on deburring and cutting include cryogenic de-flashing machine, spin trim de-flashing machine as well as rubber strip or gasket cutting machine. Plastic sector machines focus on material precision feeding include the Gravimetric Loss-in-weight feeders and its affiliated system including uploading and supplementary system.  Cryogenic Deflashing Machine aims at realizing faster quality production cycle with least rejection on those parts including rubber molded, plastic injection molded and die-casting components' flashes removal process.  Professional rubber deflashing machine supplier in China, O-ring Deflasing machine supplier in China, Deflashing machine supplier in China, Liquid Nitrogen Cryogenic Deflashing machine supplier in China.

Mini Gravimetric Feeder for Low Volume Powder Dosing   Material Applicable of Mini Loss in weight Feeder   Small and precise quantity of Resin Powder, Calcium carbonate, French Chalk, Tio2, Carbon Black, Various Additives like Anti-Oxidant, UV.   Features of Gravimetric Feeder ★Specially suitable for small quantity and high precision powder material ★The cantilever sling type weighing frame supports the storage hopper, which has the characteristics of vibration reduction and anti-level interference, which can effectively shield the non-weight value interference from the vibrator, and measure the flow of the system more accurately ★Use double servo motor to control feeding and stirring, the stirring speed is adjustable to ensure a most suitable gear ratio with feeding speed. ★The features of servo motor like light weight, small volume, low vibration, stable torque in low speed will improve the feeder the ability of anti-interference and feeding. ★485 Digital transmission of weighing data has the feature of no attenuation and anti-interference during the period of data transmission. ★No stirring motor on the top of hopper ensure stable frame, less interference and precision weighing data. ★Control system and operation panel can be embedded with the gravimetric feeder  More cryogenic deflashing equipment at www.pegedeflashing.com.   Specifications of Twin Screw Micro Feeder Parameters/Model PG-FT-18 PG-FT-20 Capacity range 0.6-5kg/h 3-30kg/h Hopper Volume 4L 10L Load Cell Range 5kg 20kg Net Weight 30kg 40kg Size 650x320x680 740x330x700 Power AC220V 1ph Feeding Servo Motor 0.2kw Stirring Servo Motor 0.4KW AC380V 3ph Feeding Servo Motor 0.2kw Stirring Servo Motor 0.4KW Screw Type Solid Twin Screw Solid Twin Screw Dynamic accuracy ±0.5% ±0.5% Resolution 1/100000 1/100000 Discharge tube Φ26.5x3x2 Φ32x3x2  

Cryogenic Deflashing Machine Shipped to Mid-East Country for Rubber Rings Deflashing High quality frozen shot cryogenic deflashing machine made in China, from Nanjing Pege, China shipped to mid-east country-Iran for rubber rings deflashing. Cryogenic deburring machine is an idea deflashing method for small precision o rings deflashing process, it is quick, good precision and lower cost. Before Nitrogen Shotblast Deflashing After Cryogenic Shotblast Deflashing After cryogenic deflasing machine, what we get is clean o rings without flashes. And thousands of rings can be deflashed in one cycle. Millions of rings can be deflashed in one day.   Pege always focus on developing and improving the cryogenic deflashing machine for the manufacturers to improve their rubber or plastic parts deburring process. Nanjing Pege is always your reliable partner for rubber cutting and deflashing demands.

Automatic Spin Trimming Deflashing Machine Shipped to Colombia   Thanks to reliable quality and high efficiency performance of spin trim deflashing machine from Nanjing Pege, China, the customer from Colombia choose one set of full automatic spin trimming deflashing system. The spin trim deflashing system contains a set of spin trim machine, a lift and a set of air blowing separator for flash separation. Good quality spin trim deflashing machine can deflash rubber parts at a efficiency of around 1-2kg per minute, 60-100kg per hour. This type of spin trimming machine only consumes power(5KW), compressed air, no need liquid nitrogen, is very economical. Spin trimmer from Nanjing Pege has full safety measures including emergency button, safety grating and protection lid. Air blowing separator with a lift is an efficient flash separation system. It can separate different shape, size and weight flashes in a quick and efficient way. Connecting with spin trimming machine, the system will be automatic and high efficient.   Pege believes that the spin trimming deflashing system will greatly improve the customer production efficiency and production process result.  

Nanjing Pege Cryogenic Deflashing Machines Shipped to Russia for Rubber Deflashing Process   Pegedeflashing is a reputational cryogenic deflashing machine manufacturer in Nanjing, China, with its profession and its integrity on the machine production and mutal cooperation, Nanjing pege already shipped two good quality cryogenic deburring system to Russian customer.   First one was shipped in the year of 2019.   Next one was shipped in the year of 2020.     A new machine of PG-40T cryogenic deflashing machine will leave our factory to Russia soon. Cryogenic deflashing machine nanjing pege is well designed and manufactured with quality, it has the feature good, stable performance, high efficiency and good process precision which is important for the customer end. To improve the deflashing process efficiency and precision is the aim and core purpose of our deflashing machine. We believe that more and more machines will go abroad to realize its value and support the customer to improve the production process and attain more success. Pege will keep our values and keep producing good nitrogen deflashing machines for all the customers in the world.     

Nanjing Pege "Frozen Shot" Cryogenic Deflashing System   Cryogenic deflashing system from Nanjing Pege will be your reliable and capable partner for the process of deflashing and deburring. Nanjing Pege keeps providing quality and well designed&produced cryogenic shotblasting deflashing machine for flash cleaning process for rubber, plastic and die-casting components. Nitrogen deflashing machine has great advantages of high processing quantity and lower deflashing cost for small components. Cryogenic deflashing machine will be a good tool for your production.

Continuous and Automatic Process of Spin Trim Deflashing for Rubber Components Flash Removal   A whole layout of the automatic spin trim deflashing system. System Description A whole system combines with one set of spinning machine, a lift for transit, and air blowing separator for efficient blowing separation.This system will greatly improve the deflashing process and the flash separation process.   -- Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better. No matter regular shape parts like O-ring, gaskets, but also irregular shape parts like bumper, caps, sleeves, bushes or blocks, all can be efficiency spin deflashed by the spin trim deflashing machine. Generally, the efficiency is around 2-3kg per batch, and about 60-90seconds per batch.   -- Air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed   --Various part and flashes are available, and more efficient.   --A lifter is an good tool and connection for the user to connect from spin trim deflashing machine and the separator, to save time, labor and be more automatic. The products and flashes or burrs are lifted and transported directly to the air blowing separator to realize a on-line deflashing and burr separation process.      

Pege Frozen Shot Cryogenic Shotblast Deflashing Machine Installed in Hungary   Great job from our customer in Hungary, Europe, who had finished the cryogenic deflashing system installation by themselves with our online guide. During the Covid-19 pandemic period, though on-site service is not available, cryogenic deburring machines from Nanjing Pege also can be set up smoothly with our detail instruction material. This is a perfect example of simple cryogenic deflashing machine system for rubber components flash removing process. We hope our machine can work well to improve the efficiency and precision of the deburring process. #europe #crogenicdeflashing 

Rubber Sheet Cutter, Spin Trim Deflashing with Air Blowing Separator Shipped to Brazil for Rubber Cutting and Deburring   Well packed rubber strip cutter and spin trim deflashing machine had shipped to Brazil to improve the production efficiency and precision of rubber compound and rubber components. Rubber Strip Cutter from Nanjing Pege can cut the rubber strip, thickness from 1mm to 15mm, by weight control or by length control. The precision can be up to 0.2mm and 0.2gram.   Rubber Strip Cutter   Besides quality and durable rubber strip cutter, Nanjing Pege also can produce qualified and efficient spin trim deflashing machine, along with the spinning trim machine, a air engery blowing separator will be equiped with the spin trim machine for flashes separation. Spin Trim Deflashing Machine can remove the flashes with different shapes and different flashes thickness, most important thing is that the part has tear trim line will be better for spinning trimming. Air blow separator can separate irregular shape flashes by using the denisty difference of main part and flashes, blow out the light flashes and keep the main parts, it is innovative and efficienty flash separation way.   Spin Trim Deflashing Machine   Air Blowing Separator We believe our machines can support customer to improve production efficiency and products quality to large extent.  

Cryogenic Deflashing Machine Shipped to Slovenia    Cryogenic deflashing machine made by Nanjing Pege Techno Machine Co.,Ltd has been shipped this month to our esteemed customer in EU- Slovenia, serving for the customer to improve the efficiency and precision of removing the small molded rubber parts flashes.  Cryogenic deburring machine is a good way to solve the deflashing problem for rubber, plastic and die-casting parts. PG-60T

  Nanjing Pege Produced Spin Trim Deflashing Machine Shipped to Italy   High quality centrifugal forced spin trim deflashing machine mainly for O rings spinning deflashing was completed, packed and ready for shipping to Bolgare, Italy. Nanjing pege spin trim deflashing machine has features of high efficiency, high power and extreme low running cost. Centrifugal force spinning rubber deflashing machine is very suitable for rubber gaskets with tear trim line. The productivity can be up to 2kgs per minute, greatly improve the efficiency and lead time at customer end. The spin trim deflashing from Nanjing Pege has stable performance with full safety measures like adding safety grating to protect the operator and add a emergency button around the outlet mouth of the machine for quick stop if any danger happens. We believe that our machine will do its job to help the customer to optimize production process and improve components quality.