Nanjing PEGE Techno Machine is a professional loss in weight feeder supplier in Nanjing, China. Besides Screw type, vibratory type loss in weight feeder, we also can produce liquid type to feed liquid material, even thought the liquid of bad mobility or even solid shape in normal temperature like Maleic Hydride. One customer from Turkey who is a specialist in the Engineering Plastic industry who submit a request of feeding the Maleic Hydride into their extruder to increase the product performance. Its shape in normal temperature is solid, when the temperature rises to 70°C, it will be liquid type, its visidity or stickness is not good. And it has pungent smell.   To feed the Maleic Anhydride, we need to heating the Maleic, keeping a sufficient pressure, ensure a precise feeding accuracy. Above is the design of the whole liquid loss in weight system. There is temperature controller for heating. From above photos we can see that a full liquid gravimetric feeder for Maleic Anhydride feeding includes: Hydraulic Diaphragm Pump for pulling up the material from the weighing hopper. Weighing hopper Load Cell Refilling hopper  Temperature controller  Pipeline for transitting, gaugues to monitor the pressure Nozzel for spraying the liquid Electrical cabinet to control the precision transportation. After enough time manufacturing and trial test, Nanjing PEGE finishes the production of good quality liquid feeder for Maleic Anhydride for Turkey customer. PEGE packed and shipped the loss in weight liquid feeder well. Nanjing PEGE Techno Machine CO., LTD has its ability to provide qualified loss in weight feeders for the clients all over the world.

  This customer started to contact Nanjing PEGE on the year of 2019, we have been a long time communications on the cryogenic deflashing machine for their rubber products deflashing process. On the year of 2022, customer sent some samples for testing. The rubber parts to be deflashed are rubber O rings. You can see from following photo: There are many flashes which are difficult for manual deflashing. After Cryogenic deflashing, we can get good results without flashes. Even though the deflashing result was acceptable, customer was hesitating to make decision to purchase the cryogenic deburring machine due to the budget problem. They paused the purchase this nitrogen shot blasting deflashing machine. On the year of 2025, last year, customer restarted the project and we talked about the model and the offer and finally we made a deal to sell the cryogenic deflashing equipment Model PG-60T to customer. It is a wonderful machine for automatic rubber deflashing process, it is well designed and well manufacturered.   Above is the packed photo for shipment. We believe that our cryogenic deflasher PG-60T will definitely be a good deflashing tool for customer to improve deflashing precision and efficiency.

High Quality, Efficient, and Reliable cryogenic deburring/deflashing machine for rubber rings deflashing, which is ordered by an client in South Korea, was shipped on March.Customer visited us at the end of Feburary, he spoken highly of our machine and gave us a rating of 95 points out 100 on this nitrogen deflashing machine, he said it was much better than their old machine from China Taiwan. PEGE's cryogenic deburring machine has its special features: 1. The width of the projectile wheel is increased to 70mm, the range of the projectile wheel is wider, and the projectile efficiency is increased by 20%. 2. Using 10 inch high-end touch screen, which can store more than 20,000 product information, and realise the functions of storing, reading, downloading, editing, host control and upgrading scanner. Improve the tracking and traceability of product handling, and adapt to the intelligent and digital management requirements of modern enterprises. 3. The projectile wheel motor is selected from the reliable brand for long time use in the low temperature environment. 4. The deflector is made of stainless steel, which is free of replacement for life, and our equipment has no impeller rotor, which can reduce the maintenance cost. 5. The sealing plate of the projectile wheel is made of ultra-high polymer UPE, the thickness is increased by 1 times, and the wear-resisting property is increased by 100%. 6. 7.5KW high power motor is used for T120,T150 models, with 600mm width vibrating screen, the processing efficiency and sorting efficiency are obviously improved. 7. Gearbox sealing system has excellent performance, in addition to the labyrinth design, we also add a layer of sealing plate to protect the oil seal. 8. The umbrella gear does not choose straight tooth structure, using helical tooth structure, high degree of overlap, large contact area, wear and tear, increase the service life of the umbrella gear. 9. The door sealing strip is made of imported material and equipped with double heating wire, which has good heating effect and long service life, and there will be no door leakage. 10. Inverted trapezoidal compact design, nozzle built-in, reduce the overall chamber volume, reduce liquid nitrogen consumption. 11. Parts barrel mouth can be closer to the ejection wheel, the injection effect is enhanced, processing efficiency is effectively improved. 12. Separate and independent electrical cabinet and chamber, the electrical cabinet will not be affected by the cold air and dust from the chamber, to improve the cleanliness and use of electrical appliances. and so on. With the above good points on details, Nanjing PEGE's nitrogen deflashing machine is one of the top liquid nitrogen rubber deflashing machines in the world. Thanks very much for his high appraise, and we hope our cryogenic deflasher can realize its value and support well.PEGE always provide high quality and reliable equipments to improve E

  Nanjing PEGE develops a new type of rubber strip cutting machine, this rubber strip cutter is specifically for silicone rubber sheet cutting. Silicone rubber is very different with other normal material as slicone is very sticky and has a film on the material for separating the materials, during cutting, the cutting machine should cut off the material, but not the film. Also, auto-stacking is very important to improve cutting efficence and reduce the labor tense. Our new mode of silicone rubber cutter is fully automatic for cutting and stacking, workers just need to take away the successfully cut materials and go to next step. Take a look at our new silicone rubber strip cutting machine for sheet cutting.

PEGE Liquid Loss in weight Feeder for Maleic Anhydride feeding to the extruder for plastic extrusion   Nanjing PEGE is a professional loss in weight feeder supplier and maker providing suitable liquid loss in weight feeder for MAH material feeding. Maleic Anhydride is a solid shape in normal temperature state, need to heat the material in about -90°C to be liquid type for smoothly feeding to extruder.   Here are some Q&A for you to better understand the liquid feeder for MAH feeding. Which of these pumps (Hydraulic Diaphragm Pump, Plunger Pump, Gear Pump) should we select for smooth feeding of maleic anhydride? It is Hydraulic Diaphragm Pump.   For maleic anhydride feeder do you also heat pump? Yes, part of the pump, the head area of the pump, by cirlucated hot water heating.   Does hot water circulate around hot maleic piping? Yes, will have hot water cirluate aroud the maleic piping.   After end of production how can we remove residual maleic? According to our experiences,  within 7 days after stopping the feeder use, no need to clean, can restart to use the feeder again directly. If more than 7 days, or longer, we will provide the cleaning method by Manual to clean the residual maleic by hot water and dry the weighing hopper.   For weighing hopper, we use condustion oil around the hopper to electrically heat the maleic inside.  Oil heating can ensure feeding accuracy and stable temperature. For the refill tank and pipes, we use circulated hot water controlled by mold temp heater to heat.   How does the temperature controller heat and will be a whole course be heated during the feeder? a.Temp controller does not heat the weighing hopper, weighing hopper use oil bath for heating by electric heating, oil bath will be no vibration, then can ensure accuracy of feeding. b. Tmperature controller heats following parts:   Refill tank(hopper);  Inlet tube of pump; Outlet tube of pum; Pump head; Pipeline from pump head to  the spray gun (about 2 meters long double-layer hot water insulated SUS pipe).   c. About 200mm from spray gun nozzle, this 200mm area, use SUS steel bellow tube with electric heating band to keep heating.   Liquid Feeder PG-FL-20 MAH material PEGE will surely provide quality loss in weight feeder for Maleic Anhydride feeding and other liquid material dosing.  

Nanjing PEGE compact cryogenic deflashing machine PG-40T shipped to Mexico for Rubber Deflashing   At the begining of Snake year, Nanjing PEGE delivered one compact model cryogenic deflashing machine PG-40T to Mexico to support customer dealing with the rubber metal parts deflashing process. PG-40T cryogenic deburring machine is a good deflashing tool for remove the flashes of rubber metal parts. Following parts can be suficiently removed by cryogenic rubber deflashing machine.           With the cryogenic automatic rubber deflashing machine, we belive that the production efficiency and part deflashing precision will be improve greatly. And PEGE will alway be there to support any clients who want to solve the headache flash deflashing problem.  

High quality and performance automatic pneumatic drive weighing cutter had been finished and shipped to our dear French customer. This rubber strip cutting machine can cut the rubber sheet by weighing the material weight and precision can be up to 0.2g. Cuttting thickness can be max 10mm.     Main Features： 1.     Pneumatic Drive, also electrical drive optional. 2.     Auto Weighing, auto identification and auto compensation to ensure higher precision of weight cutting. 3.     During cutting, machine can automatically identify the OK products and NG products, then put them into different collection boxes. 4.     When cutting the rubber sheet, either stop the machine by quantity control or manual control 5.     The machine is equipped with a patent protection program, when the user wrongly adjusts the blade or a breakdown happen, there will be warning notice on the operation panel screen. 6.     Can cut the rubber sheet by precise weight, the operation is more convenient and intelligent.   Pneumatic Auto Weighing Rubber Strip Cutter Model PG-AW-600 PG-AW-800 Type Pneumatic Drive Pneumatic Drive Power supply 1.1kw 1ph 220V 50/60Hz 1.1kw 1ph 220V 50/60Hz Size 1030*899*1580 1030*1100*1580 Weight 320kg 400kg Cutting Direction Horizontal Horizontal Cutting width ≤580mm ≤700mm Cutting Length 1-30mm 1-30mm Cutting Thickness 1~10mm 1~10mm Max Precision 0.2g* *Strip thickness should be consistent. 0.2g* *Strip thickness should be consistent. Blade Material Cr12 Mov Vacuum Heat Cr12 Mov Vacuum Heat Feeding Mode Stepper Motor Stepper Motor Cut Speed 12-18cuts/min 12-18cuts/min Speed Control PLC PLC Operation Mode 7-inch Touch Screen 7-inch Touch Screen    

NANJING PEGE TECHNO cryogenic deflashing machine PG-40T deburring PPS+GF40 plastic components   Happy New Year of 2025, best wishes to you all! ? NANJING PEGE TECHNO cryogenic deflashing machine PG-40T system keeps providing good efficiency and benifits on customer deburring process,not only for rubber parts, but plasitc parts.PPS+GF40 material is easilly to have burrs during injection molding, cryogenic deburring is a good way for you to solve this headache problem.Check the following photos before deflashing and after cryogenic deburring. After testing and verification, customer has decided to appling the cryogenic deburring system for their plastic parts deburring process.PEGE believes that PG-40T will be helpful for the improvement of production efficiency and quality.

    NANJING PEGE Techno Machine Co., Ltd newly made high quality cryogenic rubber deflashing machine is well assemblied and tested in PEGE's factory. On the month of October, the new rubber deflashing machine was well packed and shipped to Russia along with the other valcunizing press machines from other supplier in China. This cryogenic deflashing macine is used for deburr the flashes of O rings from end user in Russia. See following photos.   Before cryogenic deflahing After cryogenic deburring Cryogenic deflashing machine PG-40T is a compact, lower consumption, efficient and price friendly model suitable for smaller rubber company who has a lower production volume and lower budget for the deflashing process.  

NANJING PEGE Techno Machine Co., Ltd newly made high quality cryogenic rubber deflashing machine is well assemblied and tested in PEGE's factory. On the month of October, the new rubber deflashing machine was well packed and shipped to India through our dear client from Singapore. Cryogenic deflashing machine PG-40T is a compact, lower consumption, efficient and price friendly model suitable for smaller rubber company who has a lower production volume and lower budget for the deflashing process.     Cryogenic deburring machine PG-40T is jsut the one suitable for you and it is also reliablel and suportive as other models from NANJING PEGE.

Cryogenic Deflashing Machine 120T Installed in Our Local Customer Located in Southwest of China-Chongqing   On the October, Nanjing PEGE produced high quality and large volume cryogenic deflashing machine PG-120T was shipped and Installed in Chongqing city for our local well-known automotive rubber components manufaturer. We had a long term cooperation relationship with this client, about 13 years, we have deep trust and cooperation relationships between each other. After the summer, the clients main rubber parts' production volum grows dramatically and is need of a new cryogenic deflashing to improve their post-production deflashing efficiency. After several times discussions and adjusments, we can fully make a high quality cryogenic deburring machine to meet customer's high requirments even though their old machine is good too. Nanjing PEGE always focus on the machine details to improve the machine efficiency, stability and reduce the failures during operations as well. As PEGE's machine has many features that other supplier can not satifify, the customer finally make the decision to buy the cryogenic rubber deflashing machine 120T from us and our machine surely does a great job at customer's site.   One of the main part in customer's factory is the rubber hole covers for cars, the production volume is huge, monthly qty will be around 10 miliion, this huge qty needs a high efficiency machine to deflash. Our cryogenic deflashing machine can process about 12kgs in about 8 minutes, about 72kg per hour, 1728kgs per day in 24 hours. 1700kgs equals about 425,000 pcs. Really happy to see that cryogenic deflasher frorm Nanjing PEGE can meet customer quality demand and can help the valuable client to fufil the production increasement.  We believe more cooperation between us will be realized in the near future.    

Nanjing PEGE Loss in Weight Gravimetric feeders for Pellets, Powder and Flakes are Shipped to Europe-The Netherlands.   NANJING PEGE Techno Machine Co., Ltd is a speciallized loss in weight feeder supplier in Nanjing, China, can produce high efficiency and high-precision gravimetrica feeders for the customer's material dosing demands. On the June, after a lot of discussions and adjusments, the proposal and design for customer in Holland was approved and Nanjing PEGE started to produce 3 sets different types of loss in weight feeders for different material and different flow range. --First Gravimetric Weighing Twin Screws Feeder: PG-FT-18 For powder material dosing. Two sets twin screws for different flow rate range. Flow rate is 0.6kg to 10 kgs per hour with high precision. --Second  Loss in weight Weighing Single Screw Feeder: PG-FW-25 For Pellets material Dosing Two sets single screws for different flow rate range. Flow rate is 1kg to 10 kgs per hour with high precision. --Third Loss in weight Vibratory feeder: PG-FZ-01  For irregular shape flakes material feeding which is the most difficult and most complex type as the material shape is totally different. Flow range from 2-5kg per hour. After about 3 months design, production, assembly, testing and adjusment, finally the three weighing feeders we produced fully acheive the feeding efficiency and accuracy. Now the dosing feeders are well packed and shipped to Rottdam Port, The Netherlands, they are on the way to serve the customers.     Nanjing PEGE always focus on the company value " Efficiency& Precision" to provide quality process machines including cryogenic deflashing machines and Loss in weight Feeders as well. We have confidence that PEGE brand machines will support customer well to improve their process efficiency and accuracy.