Call at : +8613260713283
EnglishEnglish françaisfrançais españolespañol
What Are You Looking For?
GET A QUOTES
Banner
Spin Trim De-flashing Machine
Home |

Spin Trim De-flashing Machine

Spin trim deflashing machine is kind of cheap and efficient deflashing method to remove the flashes of rubber parts. The method use centrigual force to spin out the flashes and can process both Orings or irregular shape parts.

Grid List
  • Spin trim deflashing machine
    Spin Trimming Deflashing Machine with Air Blowing Separator
    Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

    Tags : spinning trim machine rubber trimming machine Spin Trim Deflashing Machine spin trimming machine rubber deflashing machine O ring deflashing machine

    Read More
  • Air Blow Separator for Spinning Trim Machine
    Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

    Tags : spinning deflashing machine spin trimming machine spin trimming deflashing machine air blowing separation rubber deflashing machine Spin Trim Deflashing Machine

    Read More
  • Spinning Deflashing Machine with Vibratory Separator
    Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

    Tags : Spin Trim Deflashing Machine spinning deflashing machine rubber deflashing machine O rings deflashing machine spin trimming deflashing machine Orings spin trimming machine

    Read More
  • Spin Trim Deflashing Machine with Vibratory Separator
    Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

    Tags : Spin Trim Deflashing Machine spinning deflashing machine rubber deflashing machine O rings deflashing machine spin trimming deflashing machine spin trimming machine

    Read More
  • Spinning Trim Deflashing Machine with Air Blowing Separator
    Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

    Tags : spinning trim machine rubber trimming machine Spin Trim Deflashing Machine spin trimming machine rubber deflashing machine air blowing separator

    Read More
  • Air Blow Separator for Spin Trimming Machine
    Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

    Tags : spinning deflashing machine spin trimming machine spin trimming deflashing machine air blowing separation rubber deflashing machine Spin Trim Deflashing Machine

    Read More
leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsApp