Nanjing Pege Cryogenic Deflashing Machines  PRODUCT DESCRIPTION PROCESSING PRINCIPLE With the decrease of the temperature, rubber/plastic parts enter into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed, and the product not be damaged.   FUNCTIONS Our cryogenic deflashing machine is widely used in removing the flashes of small rubber and plastic parts like O-rings, gaskets and other press molded or injection moulding parts. With the cryogenic processing technology, the flashes are firstly frozen and then blasted down by the high-speed projection media (Polycarbonate media). The surface quality of molded rubber and plastic rubber parts can be improved greatly while the product are not damaged.   APPLICATIONS  A. O rings, irregular rubber parts with different material and sizes.  B. Micro electronic product parts  C. Precision elastomeric parts  D. Precision injection moulding plastic parts  E. R & D part runs  F. Die casting products, like zinc aluminum, magnesium alloy   FEATURES High efficiency: The automatic rubber deflashing machine can replace about 60-80 worker to removing the flashes. High precision: It can remove small and hardened flashes which cannot be removed by handworkers and improve precision of the products. Low cost: It also has a feature of lower cost comparing with processing the parts by handworkers.  

Spin Trim Rubber Deflashing Machine for Rubber Rings and Components A whole spin trim deflashing system combines with one set of spinning machine, a lift for transit, and air blowing separator for efficient blowing separation. This system will greatly improve the deflashing process and the flash separation process. Spin trim deflashing can be suitable for various rubber components, not only O rings, gaskets, but also irregular parts like bumper, damper, blocks, caps or sleeves. Those parts which have tear trim line or groove will be better. Air Blowing separator can slove the flash separation problem and separate the flashes and part perfectly. Spin trim deflashing no need liquid nitrogen, it is a econimical way for rubber parts deflashing comparing with cryogenic deflashing. However, it is a high efficient deflashing method comparing with manual deflashing.  

Nanjing Pege Full Automatic Spin Trimming Deflashing System The spin trim deflashing system contains a set of spin trim machine, a lift and a set of air blowing separator for flash separation. Good quality spin trim deflashing machine can deflash rubber parts at a efficiency of around 1-2kg per minute, 60-100kg per hour. This type of spin trimming machine only consumes power(5KW), compressed air, no need liquid nitrogen, is very economical. Spin trimmer from Nanjing Pege has full safety measures including emergency button, safety grating and protection lid.   Air blowing separator with a lift is an efficient flash separation system. It can separate different shape, size and weight flashes in a quick and efficient way. Connecting with spin trimming machine, the system will be automatic and high efficient.   Pege believes that the spin trimming deflashing system will greatly improve the customer production efficiency and production process result.    

Pege Cryogenic Deflashing Machine for PEEK Implants Deburring Process As a precision plastic parts deburring solution,cryogenic deflashing machine from Nanjing Pege plays an important role in trimming plastic parts including PEEK or PE material medical inplant device or components. Have a check on the perfect deflashing examples of CNC maching PEEK inplant components.